|
Removing oils, greases, waxes and sealant
residue – especially silicone; cleaning surfaces to be painted,
bonded or sealed; replacing VOC solvents. VOC exempt (VOC = 0 g/L).
Certified as a Clean Air Solvent by the California South Coast
Air Quality Management District. Easy to use, low in toxicity,
essentially odorless. Safe on plastics and noncorrosive to
metals. Ideal for diluting and tailoring the viscosity of
silicones Liquid.
GR OS
liquids are used in precision cleaning of high-value parts, as
in the aerospace and aviation industries
Applications –
Cleaning plastics, metals, other surfaces, or preparing these
surfaces for painting, bonding or sealing.
Limitations – This product may not remove highly polar
contaminants.
Physical Properties
These values are not intended for use in preparing
specifications.
Flash Point, Closed Cup,
°F
(°C)
..................................................... 27 (-3)
Specific Gravity at 77°F
(25°C)
........................................................ 0.78
Boiling Point (BP),
°F
(°C)
..............................................................
229 (109.5)
Freezing Point, °F
(°C)
...................................................................
-112 (-80)
Vapor Pressure at 77°F
(25°C),
mm Hg ............................................ 31.59
Drying Rate, similar to
.....................................................................
Isopropyl alcohol
Viscosity at 77°F
(25°C),
cSt
.............................................................
0.78
Environmentally Acceptable
Ozone safe—does not
impact the stratospheric ozone layer
GR OS-610, OS-620, and OS-630 Fluids are VOC exempt and
Significant New Alternatives Policy (SNAP) approved
Not regulated under
National Emission Standards for Hazardous Air Pollutants (NESHAP)
<30
days life in the atmosphere
Based on linear volatile methylsiloxanes (rated by the South
Coast Air Quality Management
District as the number-one cleaning alternative for substrate
and precision cleaning)
User Friendly
GR OS-610, OS-620, and OS-630 Fluids are essentially odorless
Low toxicity
Safe on metals and plastics, most elastomers
Range of drying rates and flash points
available
Free recycling program
≒1
ppm nonvolatile residue, ensuring good adhesion
Container Sizes – 10-oz (238-g) pressurized
dispenser, 1- and 5-gal (3.8- and 18.9-L) pail, 55-gal (208-L)
drum.
If you don't find what you're looking for,
Contact Us.
We may have a suitable product that's not listed, or we may be
able to develop a material to fit your specific needs.
Tel : (02)2217-3442 / Fax : (02)2704-4070
|
|
